铃木GSX-R1000多少钱？_百度知道
铃木GSX-R1000多少钱？
不要水货，不知道行价？爱GSX-R1000的朋友进来答题！，10万能搞定不！装备买一辆GSX-R1000进口的
提问者采纳
2012款GSX-R1000可以买到了，12万左右。
其他类似问题
为您推荐：
您可能关注的推广
铃木的相关知识
其他3条回答
本人有k4一台.纯水.毕竟10万不是个小数目阿....建议亲自到碣石看车买车.全新车09的也不过10万元看你准备买0几年的
12款的R1000 行货
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁From Wikipedia, the free encyclopedia
The Suzuki GSX-R1000 is a
of . It was introduced in 2001 to replace the
and is powered by a
999  (61.0 ) , .
For 2001, Suzuki introduced a new GSX-R model that replaced the largest and most powerful model of the GSX-R series sport bike, the GSX-R1100, with the all new GSX-R1000. As the model name revealed, the engine's cylinder displacement was roughly 1,000 cc (61 cu in), about 100 cc smaller than its predecessor. The GSX-R1000 was not just an enlarged version of the , although it shared many features with its little brother. The main frame is the same in both models, but the material used on the big brother was .5 mm (0.020 in) thicker. Suzuki claimed the torsional rigidity of the frame had increased 10% in comparison with the GSX-R750.
The GSX-R1000 engine was a redesigned GSX-R750 engine. The R1000 had a 1 mm (0.039 in) bigger bore and 13 mm (0.51 in) longer stroke, newly designed pistons with lower crown, and gear-driven counter balancer. The engine weighed 130 lb (59 kg) which was slightly heavier than the 750 engine but 31 lb (14 kg) lighter than the engine of the . The performance of the engine is a peak of 160 bhp (120 kW) at 9,500 rpm, as measured on the crank and 143 hp (107 kW), when measured on the rear wheel with small variations between different instances of the same model. The redline is set at 12,000 rpm. The maximum torque of the engine is 80 ft·lbf (110 N·m) at 8,000 rpm. Combined with a total (dry) weight of 374 lb (170 kg) this gives the GSX-R1000 a top speed of 179 mph (288 km/h), a 1/4 mile time of 10.1 seconds at 141.7 mph (228.0 km/h), and a 0 to 100 km/h (62 mph) time of 3 seconds.
Using titanium for the exhaust down pipe (K1 model link pipe is black, K2 model link pipe is polished titanium) and the inside of the silencer, enabled the 1000s exhaust system to become 4 lb (1.8 kg) lighter than that of the 750.[] Titanium was also used in the front fork (titanium-nitride) to coat the stanchions. An exhaust tuning valve had been mounted inside the exhaust pipe. Using a servo the system dynamically adjusted the exhaust back pressure, according to engine speed, throttle position, and gear selection for increased torque, lower emissions, and decreased noise—the (stock) exhaust noise of the GSX-R1000 is notably lower than that of the GSX-R600.
With the 2001 model of the GSX-R1000, the 1998
was finally surpassed with the GSX-R being lighter and more powerful.
The 2001 model carried over to 2002 with minimal changes. 2002 introduced i.a. modifications to the fuel pump, clutch, front axle, torque link, mirrors, and luggage hooks. The manual fast-idle was replaced with a computer operated implementation (the "STV servo"). New colours, and new GSXR stickers.
After the GSX-R1000 had been three years on the roads and race tracks, Suzuki put out a new version of the model in late September 2002. Suzuki engineers had been working on the three things that mad weight, power and handling. The 2003 year's GSX-R1000 was improved in all three counts. It weighed less, had more power/torque and handled better.
The physical dimensions of the bike were almost identical with the previous year's model. The seat height and the overall height were somewhat lower but the geometry of the bike was exactly the same as before. The already rigid aluminum alloy frame was newly designed and enforced with internal ribs. The frame as well as the wheels were now coated black.
The front brakes were also new. Suzuki decided to drop the six-piston calipers. The new radially mounted four-piston calipers weigh 30 grams less and grip smaller 300 mm (12 in) discs that save another 300 g (0.66 lb). Though smaller, Suzuki claimed that the new brakes provide better stopping and turn-in performance.
The headlights of the 2003 year's GSX-R1000 were mounted vertically to enable the ram-air intakes in the front to be placed 20 mm (0.79 in) nearer the bike's center line. The new design was very much inspired by the look of the Hayabusa. The instruments were also redesigned.
The cylinder displacement of the engine remained the same 988 cc (60.3 cu in), but more power/torque and better throttle response had been achieved by adding four ventilation holes between the cylinders to equalize crankcase pressure beneath the pistons, moving the air intake nearer to the centerline and upgrading the engine management system from a 16-bit to a 32-bit ECU. The entire exhaust system was now made of titanium to save an additional 1.32 lb (0.60 kg) and the tail light was replaced with LEDs.
The 2003 model carried over to 2004 without any significant improvements.
The 2005 model year GSX-R1000 had a redesigned engine and chassis. It had 4.4 lb (2.0 kg) lower weight than the previous model and the engine had an 11 cc (0.67 cu in) larger piston displacement. It had a totally new frame reducing the total length of the bike by 1.6 in (41 mm) but reducing its wheelbase only 0.02 in (0.51 mm). There were new brakes with radial mounted calipers and 310 mm (12 in) discs at the front. The new titanium silencer (catalytic in Europe) was said to be designed to reduce turbulence to minimum. This model weighs in at a mere 365 lbs dry, putting it towards the top of the power-to-weight ratio charts.
The 2005 model has a tested
of 444 lb (201 kg). Power output is tested 162.1 hp (120.9 kW) at 11,500 rpm and peak torque is 79.9 ft·lbf (108.3 N·m) at 8,500 rpm.
The 2005 model carried over to 2006 without any significant improvements other than a few appearance changes.
On September 22, 2006, Suzuki revealed a significantly updated GSX-R1000 for 2007 at the Paris motor show. The new bike gained 14 lb (6.4 kg) over the 2006 model which was due to its new exhaust system and new emissions regulations. To counter this weight increase, Suzuki claimed improved aerodynamics along with a faster revving engine and larger throttle body. Although not a completely new model, the engine and chassis have been updated. It also featured three different engine mapping configurations, selectable via two buttons located on the right handlebar. One up, and one down arrow to cycle between Mode A (unrestricted), Mode B (reduced power until 50% throttle is applied), and Mode C (reduced power throughout the rpm regardless of throttle application). It also received a hydraulic clutch.
The 2007 model carried over to 2008 without any significant improvements.
All specifications are manufacturer claimed and estimated.[]
988 cc (60.3 cu in), 4-stroke, four-cylinder, liquid-cooled, DOHC 16-valve, TSCC
998.6 cc (60.94 cu in), 4-stroke, four-cylinder, liquid-cooled, DOHC, 16-valve, TSCC
999 cc (61.0 cu in), 4-stroke, four-cylinder, liquid-cooled, DOHC, 16-valve, TSCC
Bore × stroke:
73.0 mm × 59.0 mm (2.87 in × 2.32 in)
73.0 mm × 59.0 mm (2.87 in × 2.32 in)
73.4 mm × 59.0 mm (2.89 in × 2.32 in)
74.5 mm × 57.3 mm (2.93 in × 2.26 in)
Compression ratio:
Fuel system:
Fuel Injection
Lubrication:
Digital/transistorized
Transmission:
6-speed, constant mesh
6-speed, constant mesh, Back-torque limiting clutch
#530 chain(110 links) 17T / 42T
#530 chain(110 links) 17T / 43T
#530 chain(114 links) 17T / 42T
2,045 mm (80.5 in)
2,070 mm (81 in)
2,030 mm (80 in)
2,045 mm (80.5 in)
715 mm (28.1 in)
715 mm (28.1 in)
710 mm (28 in)
720 mm (28 in)
710 mm (28 in)
1,135 mm (44.7 in)
1,145 mm (45.1 in)
1,130 mm (44 in)
Seat height:
830 mm (33 in)
820 mm (32 in)
810 mm (32 in)
Ground Clearance:
130 mm (5.1 in)
125 mm (4.9 in)
120 mm (4.7 in)
Wheelbase:
1,410 mm (56 in)
1,405 mm (55.3 in)
1,415 mm (55.7 in)
1,405 mm (55.3 in)
Dry Weight:
374 lb (170 kg)[]
370 lb (170 kg)[]
365 lb (166 kg)[]
379 lb (172 kg)[]
448 pounds (203 kilograms)(wet)[]
Suspension front:
Kayaba 43 mm (1.7 in) Inverted telescopic, coil spring, oil damped, spring pre-load fully adjustable, rebound compression damping force adjustable.
Kayaba 43 mm (1.7 in) Inverted telescopic forks with DLC coating, spring preload, rebound and compression adjustment
Inverted telescopic, coil spring, fully adjustable spring preload, compression and rebound damping
Inverted telescopic, coil spring, fully adjustable spring preload, high & low speed compression and rebound damping
Showa Inverted telescopic, coil spring, fully adjustable spring preload, high & low speed compression and rebound damping/New electronically controlled steering damper uses a solenoid valve to move a tapered needle reducing or increasing oil flow to adjust damping force.
Suspension rear:
Link type, gas/oil damped, coil spring, spring pre-load fully adjustable, rebound damping force and compression damping force adjustable
Link type, coil spring, oil damped, adjustable spring preload, compression and rebound damping
Link-type, gas/oil-damped, fully adjustable spring preload, compression and rebound damping
Link-type, gas/oil-damped, fully adjustable spring preload, high & low speed compression and rebound damping
Brakes front:
Twin semi floating stainless discs 320 mm (13 in) and Tokico 6 piston calipers
Twin 300 mm (12 in) semi floating stainless discs and Tokico 4 piston radial mounted calipers
Dual hydraulic disc
Brakes rear:
Single disc 220 mm (8.7 in) and Tokico dual piston caliper
Single 220 mm (8.7 in) disc and a dual piston caliper
Single hydraulic disc
Tires front:
120/70-ZR-17
Tires rear:
190/50-ZR-17
Fuel tank capacity:
18 L (4.0 imp  4.8 US gal)
(Bowtie Magazines), 2010
from Street Bike
from Motorcycle daily
from Motorcyclist Online
Suzuki. . Archived from
on December 23, 2007.
Wikimedia Commons has media related to .
: Hidden categories:$(".user_nav_b_tag").click(function () {
$.tips.show(".user_nav_b", { top: 30, left: -360 }, us_tags, "tr");
$(document).click(function () {
$.tips.hidden(".user_nav_b");
上传时间：日 09:35
喜欢的人：
更多的图片